Inflatable Restraint Front End Sensor Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Supplemental Inflatable Restraint Front End Discriminating Sensor Assembly & Bolts

Courtesy of SUZUKI OF AMERICA CORP.

COMPONENT REFERENCE TABLE

Callout	Component Name
WARNING: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs. Preliminary Procedure Disable the supplemental inflatable restraint (SIR) system. Refer to SIR DISABLING AND ENABLING . Left supplemental inflatable sensor requires to remove battery box. Refer to REMOVAL PROCEDURE
1	Supplemental Inflatable Restraint Front End Discriminating Sensor Bolt (Qty: 4) CAUTION: Refer to FASTENER NOTICE . Tip: Loosen bolts in order to remove sensor. Tightening torque 8 N.m (71 lb in)
2	Supplemental Inflatable Restraint Front End Discriminating Sensor Assembly (Qty: 2) Procedure Remove connector position assurance (CPA) retainer. Disconnect electrical connector.