Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Remove the electrical center cover.
Locate the relay. Refer to ELECTRICAL CENTER IDENTIFICATION VIEWS to locate the electrical center where the relay exists.
NOTE:
- Always note the orientation of the relay.
- Ensure that the electrical center is secure, as not to put added stress on the wires or terminals.
  
  Fig 1: Pulling Relay From Electrical Center
  Courtesy of SUZUKI OF AMERICA CORP.
Using the J 43244 (1) position the tool on opposing corners of the relay (2).
CAUTION: Use J43244 to pull the relay straight out from the electrical center terminals. The use of pliers or a flat bladed tool could damage the electrical center.
Remove the relay (2) from the electrical center.