Window Motor
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Install a 30-amp fused jumper wire between the control terminal 1 and 12 volts. Momentarily install a jumper wire between the control terminal 2 and ground. The appropriate window motor should perform the UP or DOWN function.
- If the function does not perform as specified, replace the appropriate window motor.
- Reverse the jumper wires; the appropriate window motor should perform the DOWN or UP function.
- If the function does not perform as specified, replace the appropriate window motor.