Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Water Pump Seal & Water Pump Bolts (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Install a NEW water pump seal.
Install the water pump.
CAUTION: Refer to FASTENER NOTICE .
Install the water pump bolts.
Tightening torque

Tighten the water pump bolts to 10 N.m (89 lb in) .

Fig 2: Identifying Water Pump Pulley & Water Pump Pulley Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install the water pump pulley and the water pump pulley bolts.

Fig 3: Installing Water Pump Pulley Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Use the EN 46104 in order to retain the water pump pulley.
Install the water pump pulley bolts.
Tightening torque

Tighten the water pump pulley bolts to 10 N.m (89 lb in) .
Install the drive belt. Refer to INSTALLATION PROCEDURE .
Fill the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM (LY7 GE 47716 FILL) and DRAINING AND FILLING COOLING SYSTEM (LY7 STATIC FILL) .