Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
Both Axles		2.2		B
Front,Both Sides		1.0		B
Rear,Both Sides		1.4		B
Combination Procedure: AXLE SEAL: Replace:
Rear,Both Sides		0.8		B
Rear,One Side		0.6		B
Combination Procedure: BRAKE HOSE: Replace:
Each Additional	Includes: Bleed Brakes.	0.2		B
One	Includes: Bleed Brakes.	0.3		B
Combination Procedure: CALIPER: Overhaul:
Each	Includes: Bleed Brakes.	0.5		B
Combination Procedure: CALIPER: Replace:
Each	Includes: Bleed Brakes.	0.3		B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing: This operation does not apply to drive axles. If on vehicle refinishing is not possible use appropriate repair operation.
4WD, Front,Each	Includes: Repack Wheel Bearings.	0.7		B
Combination Procedure: DISC ROTOR: Replace:
4WD, Front,Each		0.7		B
Combination Procedure: OIL SEAL WEAR SLEEVE: Replace:
Each		0.2		B
Combination Procedure: WHEEL BEARING: Repack:
4WD, Front Wheel,Both Sides		1.4		B
Combination Procedure: WHEEL BEARING: Replace:
4WD, Front Wheel,One Side	Includes: Repack Wheel Bearings.	0.8		B
Combination Procedure: WHEEL CYLINDER: Overhaul:
Off Vehicle,Each	Includes: Bleed Brakes.	0.5		B
On Vehicle,Each	Includes: Bleed Brakes.	0.3		B
Combination Procedure: WHEEL CYLINDER: Replace:
Each	Includes: Bleed Brakes.	0.3		B