Intermediate Drive Shaft Disassembly

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Intermediate Drive Shaft Components

Courtesy of SUZUKI OF AMERICA CORP.

CALLOUT AND COMPONENT NAME TABLE

Callout	Component Name
1	Half Shaft Retainer
2	O-Ring
3	Front Wheel Drive Intermediate Shaft Bearing Retainers (Qty: 2)
4	Front Wheel Drive Intermediate Shaft Bearing Assembly Tip: Use a press, with the J 22912-B flat side up, in order to remove the bearing assembly. Special Tools J 22912-B Rear Pinion and Axle Bearing Remover