LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1986 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Power Assisted Steering System) >> Repair Instructions >> Power Steering Cooler Pipe/Hose Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel injector sight shield. Refer to REMOVAL PROCEDURE .
  2. Remove the air cleaner outlet duct. Refer to REMOVAL PROCEDURE .
  3. Remove the front tire/wheel assemblies. Refer to REMOVAL PROCEDURE .
  4. Remove the left side engine splash shield. Refer to ENGINE SPLASH SHIELD REPLACEMENT - LEFT SIDE .
  5. Place drain pans under the vehicle as needed.
    Fig 1: Identifying Power Steering Cooler Pipe Clamp & Power Steering Cooler Pipe
    G04844013Courtesy of SUZUKI OF AMERICA CORP.
  6. Compress the power steering cooler pipe clamp (1) and disconnect the power steering cooler pipe (2) from the remote power steering fluid reservoir.
    Fig 2: Identifying Power Steering Cooler Pipe
    G04844014Courtesy of SUZUKI OF AMERICA CORP.
  7. Disconnect the power steering cooler pipe fitting (1) from the power steering gear.
  8. Unclip all power steering cooler pipe routing brackets.
  9. Remove the power steering cooler pipe from the vehicle.
scientia non olet · About LEMON Manuals