Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting Engine Wiring Harness Electrical Connector

Courtesy of SUZUKI OF AMERICA CORP.

Remove the air cleaner outlet duct. Refer to REMOVAL PROCEDURE .
Disconnect the engine wiring harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.

Fig 2: Identifying Air Cleaner Element
Courtesy of SUZUKI OF AMERICA CORP.
Release the clips (1) on the air cleaner lower half.
Open and rotate the air cleaner upper half.
Remove the air cleaner element.