LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1986 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Security And Locks) >> Diagnostic Information and Procedures >> Power Door Locks Inoperative >> Component Testing >> Passenger Door Latch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Passenger Door Latch

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a 20A fused jumper wire between the control terminal 6 and 12 volts. Momentarily install a jumper wire between the control terminal 5 and ground.
  2. Verify the latch locks.
    • If the function does not perform as specified, replace the passenger door latch.
  3. Install a 20A fused jumper wire between the control terminal 5 and 12 volts. Momentarily install a jumper wire between the control terminal 6 and ground
  4. Verify the latch unlocks.
    • If the function does not perform as specified, replace the passenger door latch.
scientia non olet · About LEMON Manuals