Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transaxle Range Selector Lever (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .

Install the transaxle range selector lever and lever nut.
Tightening torque

Tighten the nut to 16 N.m (12 lb ft) .

Fig 2: Identifying Shift Control Cable, Bracket & Transaxle Range Switch Lever
Courtesy of SUZUKI OF AMERICA CORP.
Install the shift control cable (2) to the shift control cable bracket (3). Ensure the shift control cable retaining tabs fully engage the shift control cable bracket.
Connect the shift control cable (1) to the transaxle range switch lever (4).
Install the battery tray. Refer to BATTERY TRAY REPLACEMENT .