Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Latch Release Strap & Floor Latches (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Install the rear seat to the vehicle, locating the seat over the studs on the floor.
Secure the rear of the seat by pushing down on the back of the seat ensuring that the seat latch (2) is securely latched.

Fig 2: Identifying Attachments Nuts
Courtesy of SUZUKI OF AMERICA CORP.
Install the 6 attachments nuts (1) to the front and side risers of the seat.
Tightening torque

Tighten the bolts to 40 N.m (30 lb ft) .
Remove the bolt (1) after that seat is securely in place.

Fig 3: Identifying Rear Seat Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Return the rear seat to its original position.