Temperature Regulation

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition is turned to the ON position, the heated seats will initialize in the OFF state. With each activation of the heated seat switch, the heated seat module will cycle the temperature setting in the following manner: HIGH, LOW, and OFF.

The heated seat system is designed in order to warm the seat cushion and seat back to approximately 42°C (107.6°F) when in the high heat position, and 37°C (98.6°F) when in the low heat position. The heated seat module monitors the seat temperature through the temperature sensor signal circuit and the temperature sensor (thermistor) that is located in the seat cushion. The temperature sensor is a variable resistor, it's resistance changes as the temperature of the seat changes. When the temperature sensor resistance indicates to the heated seat module that the seat has reached the desired temperature, the module opens the ground path of the seat heating elements through the heated seat element control circuit. The module will then cycle the element control circuit open and closed in order to maintain the desired temperature.