Simple Calibration: Notes
WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Perform simple calibration at lighted places.
- After performing simple calibration, visual check is performed again. Therefore, do not remove the packing tape (target).
- Avoid work in the situation where strong light is reflected or thick shadow is created by the light from one direction (such as outdoor with strong sunlight) as it is difficult to see indications on the center information display.
Procedures vary depending on a targeted camera. Perform the following procedures.
- Front or rear view camera: Perform the operation procedure A. Ref. to ENTERTAINMENT & MONITORING>CAMERA>ADJUSTMENT>SIMPLE CALIBRATION>OPERATION PROCEDURE A .
- Side view camera: Perform the operation procedure B. Ref. to ENTERTAINMENT & MONITORING>CAMERA>ADJUSTMENT>SIMPLE CALIBRATION>OPERATION PROCEDURE B .