LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2025 >> Forester Wilderness >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Engine Lubrication System) >> Oil Level Switch >> Installation >> When The CROSSMEMBER COMPL Front Was Removed
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

When The CROSSMEMBER COMPL Front Was Removed

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a new O-ring to install the oil level switch, and secure the harness with the clip.
    NOTE: Apply engine oil to O-ring.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

    G13199185Courtesy of SUBARU OF AMERICA, INC.
  2. Secure the harness with clip, and connect the connector.
    G13199164Courtesy of SUBARU OF AMERICA, INC.
  3. Install the engine mounting LH. Ref. to MECHANICAL (H4DOTC)>ENGINE MOUNTING>INSTALLATION .
  4. Install the crossmember COMPL front. Ref. to FRONT SUSPENSION>CROSSMEMBER>INSTALLATION .
  5. Fill engine oil. Ref. to LUBRICATION (H4DOTC)>ENGINE OIL>REPLACEMENT .
  6. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals