LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> WRX Base >> Repair and Diagnosis >> Body & Frame >> Seat System - Seats >> Seat Heater >> Installation >> Rear Seat Heater Control Module
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rear Seat Heater Control Module

CAUTION:
  • Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  • Side impact sensor (under the rear center seat) for the airbag system is located under the front center of the rear seat cushion. Be careful not to apply strong impact to the sensor when working with the rear seat cushion removed.
  1. Install the rear seat heater control module.

    Tightening torque: 

    13 N.m (1.3 kgf-m, 9.6 ft-lb) 

  2. Install the trunk trim panel side RH. Ref. to EXTERIOR/INTERIOR TRIM>TRUNK ROOM TRIM>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .