LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Outback Premium >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Power Seat Memory System (Diagnostics) >> Control Module I/O Signal >> Electrical Specification >> Seat Position Memory Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Seat Position Memory Control Module

G13632944Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Contents Measuring condition Standard Note
(St43) No. 1 Seat motor drive power supply Always 9.0 - 16 V -
(St43) No. 2 GND Always 1 Ω or less -
(St43) No. 3 Slide forward output When the motor is operated 9.0 - 16 V -
(St43) No. 4 Slide rearward output When the motor is operated 9.0 - 16 V -
(St43) No. 5 Lifter UP output When the motor is operated 9.0 - 16 V -
(St43) No. 6 Lifter DOWN output When the motor is operated 9.0 - 16 V -
(St43) No. 7 Slide forward SW input Switch ON 1.5 V or less -
(St43) No. 8 Tilt up SW input Switch ON 1.5 V or less -
(St43) No. 9 Reclining up SW input Switch ON 1.5 V or less -
(St43) No. 10 Lifter up SW input Switch ON 1.5 V or less -
(St43) No. 11 - - - -
(St43) No. 12 - - - -
(St43) No. 13 Slide pulse input When the motor is operated Pulse input -
(St43) No. 14 - - - -
(St43) No. 15 Lifter pulse input When the motor is operated Pulse input -
(St43) No. 16 - - - -
(St43) No. 17 Seat pulse sensor power supply Always 9.0 - 16 V -
(St43) No. 18 Slide rearward SW input Switch ON 1.5 V or less -
(St43) No. 19 Tilt down SW input Switch ON 1.5 V or less -
(St43) No. 20 Reclining backward SW input Switch ON 1.5 V or less -
(St43) No. 21 Lifter down SW input Switch ON 1.5 V or less -
(St43) No. 22 Reclining pulse input When the motor is operated Pulse input -
(St43) No. 23 - - - -
(St43) No. 24 Tilt pulse input When the motor is operated Pulse input -
(St43) No. 25 Seat pulse sensor GND Always 1 Ω or less -
(St43) No. 26 - - - -
(St42) No. 1 Tilt UP output When the motor is operated 9.0 - 16 V -
(St42) No. 2 Tilt DOWN output When the motor is operated 9.0 - 16 V -
(St42) No. 3 - - - -
(St42) No. 4 - - - -
(St42) No. 5 Reclining forward output When the motor is operated 9.0 - 16 V -
(St42) No. 6 Reclining backward output When the motor is operated 9.0 - 16 V -
(St42) No. 7 - - - -
(St42) No. 8 - - - -
(St42) No. 9 - - - -
(St42) No. 10 - - - -
(St42) No. 11 - - - -
(St42) No. 12 - - - -
(St42) No. 13 - - - -
(St42) No. 14 - - - -
(St42) No. 15 CAN communication Low - Cannot be measured -
(St42) No. 16 CAN communication Hi - Cannot be measured -
(St42) No. 17 - - - -
(St42) No. 18 IGN input IG ON 9.0 - 16 V -
(St42) No. 19 - - - -
(St42) No. 20 - - - -
(St42) No. 21 GND Always 1 Ω or less -
(St42) No. 22 - - - -
(St42) No. 23 - - - -
(St42) No. 24 ECM power supply Always 9.0 - 16 V -
scientia non olet · About LEMON Manuals