October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Air Intake Boot: Installation
- Install the air intake boot.
- If PCV hose has been disconnected, connect the PCV hose and set the air intake boot.
- Install the clips, and tighten the clamps.
NOTE:
- Align the clamp threaded portion with the stopper of the air intake boot. (2.0 L model)
 Courtesy of SUBARU OF AMERICA, INC.
|
- Align the clamp hole with the protrusion of the air intake boot. (2.5 L model)
 Courtesy of SUBARU OF AMERICA, INC.
|
Tightening torque
:
3 N.m (0.3 kgf-m, 2.2 ft-lb)