LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Crosstrek Base >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection System >> Knock Sensor >> Installation >> 2.0 L Model >> RH Side
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

RH Side

  1. Install the knock sensor and connect the connector.
    NOTE:
    • Knock sensor must be positioned so that the connector center comes within the range shown in the figure  .
    • Make sure that the knock sensor and its connector do not touch the adjacent parts  .
    G16760600Courtesy of SUBARU OF AMERICA, INC.
    (a)  Front of engine 

    Tightening torque  :

    25 N.m (2.5 kgf-m, 18.4 ft-lb) 

  2. Install the PCV hose No. 1. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO)>PCV HOSE>INSTALLATION>PCV HOSE NO. 1 .
  3. Install the air intake boot. Ref. to INTAKE (INDUCTION) (H4DO)>AIR INTAKE BOOT>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals