October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Transfer Reduction Driven Gear: Assembly
- Press-fit a new ball bearing (intermediate case side) and a new ball bearing (extension case side) using the ST and a press.
NOTE:
- Apply CVTF to the press-fitting area.
- The axle where a spline is formed is the intermediate case side.
Preparation tool:
ST: BUSHING 1-2 INSTALLER (499277100)
 Courtesy of SUBARU OF AMERICA, INC.
|