LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Ascent Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Mass Air Flow and Intake Air Temperature Sensor >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Mass Air Flow and Intake Air Temperature Sensor: Installation

  1. Install the mass air flow and intake air temperature sensor, and connect the connector.
    CAUTION:
    • When reusing the mass air flow and intake air temperature sensor, check the O-ring and install it so that it is not damaged or get caught.
    • If the O-ring is faulty, replace it with a new mass air flow and intake air temperature sensor.

    Tightening torque: 

    1 N.m (0.1 kgf-m, 0.7 ft-lb)

  2. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals