LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Ascent Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Control Unit >> Removal >> MULTIVIEW Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

MULTIVIEW Control Module

  1. When replacing the multiview control assembly, store the [Front&Side Camera/Multi View Monitor] customizing information. Ref. to COMMON (DIAGNOSTICS)>CUSTOMIZE>OPERATION > SAVE SETTINGS / READ SETTINGS
  2. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the grille ventilation assembly center. Ref. to AIR CONDITIONER>AIR VENT GRILLE>REMOVAL>CENTER GRILLE ASSEMBLY .
  4. Remove the center information display assembly. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>REMOVAL .
  5. Remove the multiview control assembly.
    1. Disconnect the cable CCM connector.
    2. Remove the screws to remove the multiview control assembly.
      NOTE: Remove the screws on LH side in the same procedure as on the RH side.
G16441535Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals