LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2023 >> WRX Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Exterior Trim & Interior Trim) >> Console Box >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Console Box: Installation

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the console box assembly and connect the connector.

    Tightening torque: 

    6.5 N.m (0.7 kgf-m, 4.8 ft-lb)

  2. Connect the connector, and install the cover assembly front.
  3. Install the grip. (CVT model) Ref. to CONTROL SYSTEMS>SELECT LEVER>INSTALLATION
  4. Install the tray center LWR and the shift boot. (MT model)
  5. Install the shift knob. (MT model) Ref. to CONTROL SYSTEMS>MT GEAR SHIFT LEVER>INSTALLATION
  6. Install the boot assembly parking brake. (MT model)
  7. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
scientia non olet · About LEMON Manuals