LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2023 >> WRX Base, Automatic CVT Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Stabilizer >> Installation >> Stabilizer Bushing
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Stabilizer Bushing

CAUTION:
  • Install the rubber bushing stabilizer front so that the slit does not shift to the right or left.
  • Install the clamp stabilizer with the peak of triangle facing the front of the vehicle.
G14601729Courtesy of SUBARU OF AMERICA, INC.
NOTE: The rubber bushing stabilizer front can be used with its slit facing either front or rear.
  1. Before installation, check the rubber bushing stabilizer front for abnormal cracks, fatigue or damage.
  2. Install the rubber bushing stabilizer front.
  3. Install the clamp stabilizer.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb)

  4. Install the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>INSTALLATION .
scientia non olet · About LEMON Manuals