Bushing Front - Front Arm (CROSSTREK Model)

Put an alignment mark on the front arm assembly based on the split portion of the bushing intermediate plate of the bushing front - front arm. (Except for HEV model)

CAUTION: Always put an alignment mark for aligning the position on bushing installation.

Courtesy of SUBARU OF AMERICA, INC.

(a)	Put an alignment mark.
(b)	Gap of bushing intermediate plate
(c)	Bushing intermediate plate

Using the ST and a press, remove the bushing front - front arm.
Preparation tool:

ST: INSTALLER & REMOVER SET (927680000)

Courtesy of SUBARU OF AMERICA, INC.