October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
At Select Lever Assembly
- Remove the spacer plate.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the gasket.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Insert a flat tip screwdriver with a thin tip under the connector and disconnect the harness connector from the plate COMPL.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the harness from the plate COMPL.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Raise the claw with a flat tip screwdriver with a thin tip and remove the solenoid unit.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the terminal of the solenoid unit using a flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less, KTC connector terminal tool ECC-1T or equivalent.
 Courtesy of SUBARU OF AMERICA, INC.
|
| (A) |
Solenoid unit terminal (color code: blue) |
| (B) |
Solenoid unit terminal (color code: black) |
- Remove the clamp push nut.
NOTE:
Replace the clamp push nut with a new part.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Pull out shaft control.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the clamp push nut.
NOTE:
Replace the clamp push nut with a new part.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Pull out spacer pin guide.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the clamp pin.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the spacer pin guide.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the select lever COMPL from the plate COMPL.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the arm COMPL. (Except for Crosstrek hybrid model)
 Courtesy of SUBARU OF AMERICA, INC.
|
| (A) |
Arm COMPL |
| (B) |
Selector lever COMPL |
- Remove the plate guide from the select lever COMPL.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the rod detent and detent spring from the select lever COMPL.
 Courtesy of SUBARU OF AMERICA, INC.
|