LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Engine Lubrication System) >> Scavenge Pump >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Scavenge Pump: Installation

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set new O-rings.
  2. Temporarily install the scavenge pump, and tighten the bolts.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  3. Install the oil jet.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  4. Install the crank sprocket. Ref. to MECHANICAL (H4DOTC)>Crank Sprocket>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals