LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Rear Gate System >> Power Rear Gate Control Module >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Power Rear Gate Control Module: Installation

  1. Install the power rear gate control module.
    NOTE: Connect the connectors in reverse order of removal.
  2. Install the trim panel assembly apron RH. Ref. to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>INSTALLATION .
  3. Install the third seats. Ref. to SEATS>Third Seat>INSTALLATION .
  4. Install the floor mat side, floor mat center, and box sub-trunk assembly.
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals