October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Drive Cycle E
| DTC |
Item |
Condition |
Number of driving cycles on the detecting condition |
| P0461 |
FUEL LEVEL SENSOR "A" CIRCUIT RANGE/PERFORMANCE |
- |
2 |
- Make sure that the battery voltage is 10.9 V or more.
- Perform the Clear Memory Mode. Refer to ENGINE (DIAGNOSTICS) (W/O STI)>CLEAR MEMORY MODE .
- Drive for approximately 30 L (7.9 US gal, 6.6 Imp gal) of fuel.
NOTE:
- It is acceptable to drive the vehicle intermittently.
- Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
- Read the temporary code using the Subaru Select Monitor or general scan tool. Refer to ENGINE (DIAGNOSTICS) (W/O STI)>READ DIAGNOSTIC TROUBLE CODE (DTC)>OPERATION .