LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transaxle & Differential (TY856)) >> Neutral Position Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Neutral Position Switch: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the neutral position switch.
    NOTE: Use a new gasket.

    Tightening torque: 

    32 N.m (3.3 kgf-m, 23.6 ft-lb)

  2. Connect the connector and clip of the neutral position switch.
  3. Install the manual transmission assembly to the vehicle. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>MANUAL TRANSMISSION ASSEMBLY>INSTALLATION .
scientia non olet · About LEMON Manuals