LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transaxle & Differential (TY856)) >> Extension Case >> Assembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Extension Case: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the reverse check system. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>REVERSE CHECK SYSTEM>INSTALLATION .
  2. Install the extension case oil seal. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>OIL SEAL>REPLACEMENT .
  3. Using the ST, install the shifter arm shaft oil seal.

    ST1 18657AA000 INSTALLER 

    ST2 18671AA000 OIL SEAL GUIDE 

    G13648036Courtesy of SUBARU OF AMERICA, INC.
  4. Install the oil plate.
    G05342403Courtesy of SUBARU OF AMERICA, INC.
  5. Select the adjusting washer, and attach to the extension case. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>EXTENSION CASE>ADJUSTMENT .
  6. Install the taper roller bearing (extension case side) outer race to the extension case.
    CAUTION: Apply transmission gear oil onto sliding or revolving surfaces before installation.
  7. Install the shift bracket.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb)

    G05003282Courtesy of SUBARU OF AMERICA, INC.
  8. Attach the oil guide and the transfer drive gear. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>TRANSFER DRIVE GEAR>INSTALLATION .
scientia non olet · About LEMON Manuals