LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Anti-Theft System - Security And Locks) >> Fuel Lid >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Lid: Installation

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the saucer COMPL.
    NOTE:

    Securely install the rubber portion of the saucer COMPL to the fuel filler pipe assembly. 

  2. Install a new ring clip.
  3. Install the fuel filler pipe protector.
  4. Install the fuel filler cap.
  5. Install the flap outer.
  6. Install the lock assembly fuel and connect the connector.
  7. Install the trunk trim panel side RH. Ref. to EXTERIOR/INTERIOR TRIM>TRUNK ROOM TRIM>INSTALLATION
  8. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
scientia non olet · About LEMON Manuals