LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Fuel Injection System) >> Mass Air Flow and Intake Air Temperature Sensor >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Mass Air Flow and Intake Air Temperature Sensor: Installation

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the mass air flow and intake air temperature sensor, and connect the connector.

    Tightening torque: 

    1 N.m (0.1 kgf-m, 0.7 ft-lb)

  2. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
scientia non olet · About LEMON Manuals