LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Push Button Ignition Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Push Button Ignition Switch: Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Refer to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Refer to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the cover assembly - instrument panel LWR driver. Refer to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Remove the knee airbag module. Refer to AIRBAG SYSTEM>KNEE AIRBAG MODULE>REMOVAL .
  4. Remove the push button ignition switch.
    1. Disconnect the connector, and remove the aspirator hose.
      G08316199Courtesy of SUBARU OF AMERICA, INC.
    2. Release the claws, and then remove the panel - switch.
    3. Release the claws, and then remove the push button ignition switch from the panel - switch.
    G09483949Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals