| Fresh/Recircle Air Door Auto Mode |
AUTO |
AUTO |
When AUTO mode is actuated, inlet switching is also automatically operated. |
| MANU |
Even when AUTO mode is actuated, inlet switching is not automatically operated. (Switching can only be manually operated) |
| Compressor auto mode |
AUTO |
AUTO |
When AUTO mode is actuated, compressor is also automatically operated. |
| MANU |
Even when AUTO mode is actuated, compressor is not automatically operated. (Switching can only be manually operated) |
| Setting temperature shift |
0 |
-3 |
Adjust the A/C target value relative to the set temperature. |
| -2 |
| -1 |
| 0 |
| +1 |
| +2 |
| +3 |
| Mode/VentII |
Yes |
Yes |
When AUTO mode is operated, VENT II mode (upper wind: large, lower wind: small) is present. |
| No |
When AUTO mode is operated, VENT II mode (upper wind: large, lower wind: small) is absent. |
| Mode/All Flow |
Yes |
Yes |
When AUTO mode is operated, all-flow mode (wind comes from all blower vents) is present. |
| No |
When AUTO mode is operated, all-flow mode (wind comes from all blower vents) is absent. |
| Mode/HeatIII |
Yes |
Yes |
When AUTO mode is operated, HEAT III mode (footwell/DEF ratio is different) is present. |
| No |
When AUTO mode is operated, HEAT III mode (footwell/DEF ratio is different) is absent. |
| Release Max A/C by Mode Sw |
Yes |
Yes |
When the mode switch is operated in MAX A/C status, MAX A/C status is deactivated. |
| No |
Even when the mode switch is operated in MAX A/C status, MAX A/C status is not deactivated. |