October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Manifold Absolute Pressure And Intake Air Temperature Sensor: Installation

WARNING: This page is about a different variant/trim than selected.

Install the manifold absolute pressure and intake air temperature sensor.
Tightening torque:

3.4 N.m (0.3 kgf-m, 2.5 ft-lb)
Connect the connector.
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .