LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Power Seat System >> Removal >> Power Seat Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Seat Switch

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Prior to starting work, check the following precautions. Ref. to SEATS>GENERAL DESCRIPTION>CAUTION .
  2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the front seat from vehicle. Ref. to SEATS>FRONT SEAT>REMOVAL .
  4. Remove the cover hinge outside.
    1. Remove the knob power seat.
    2. Release it from the hinge base cover outside in the rear side.
    3. Release the clips.
    4. Pull forward to release the claw (a) and remove the cover hinge outside.
    5. Remove the screws to remove the switch assembly power seat.
    6. Disconnect the switch assembly power seat connector and remove the cover hinge outside.
G13952323Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals