October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
View Button
- Measure the resistance between connector terminals.
 Courtesy of SUBARU OF AMERICA, INC.
|
| Terminal No. |
Inspection conditions |
Standard |
| 1 - 4 |
Switch OFF |
1 MΩ or more |
| Switch ON |
Less than 1 Ω |
- Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.
CAUTION:
When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
Incorrect polarity connection may cause LED damage inside the switch.
| Terminal No. |
Inspection conditions |
Specification |
| 2 (+) - 3 (-) |
Apply battery voltage. |
Light On |
- Replace the switch assembly VIEW if it is found defective.