October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Cruise Control Command Switch: Inspection
- Measure the resistance between connector terminals.
 Courtesy of SUBARU OF AMERICA, INC.
|
| Terminal No. |
Inspection conditions |
Standard |
| 3 - 9 |
DISTANCE-SET/-DISTANCE+RES/+ |
All OFF |
Approx. 4, 020 Ω |
| DISTANCE- |
ON |
Less than 1 Ω |
| SET/- |
ON |
Approx. 250 Ω |
| DISTANCE+ |
ON |
Approx. 680 Ω |
| RES/+ |
ON |
Approx. 1, 470 Ω |
| 4 - 9 |
CRUISE LANE CENTERING |
All OFF |
Approx. 4, 020 Ω |
| CRUISE |
ON |
Less than 1 Ω |
| LANE CENTERING |
ON |
Approx. 680 Ω |
| 8 - 7 |
I S# |
All OFF |
3 MΩ or more |
| I |
ON |
Less than 1 Ω |
| S# |
ON |
Approx. 1, 800 Ω |
- Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.
CAUTION:
When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
CAUTION:
Incorrect polarity connection may cause LED damage inside the switch.
| Terminal No. |
Inspection conditions |
Specification |
| 10 (+) - 11 (-) |
Apply battery voltage. |
Light ON |
- Replace the EyeSight steering switch if it is found defective.