October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Remote Control Mirror Switch: Inspection
- Check the resistance between switch door mirror terminals.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Changeover switch RH
| Terminal No. |
Inspection conditions |
Standard |
12 - 1
12 - 18 |
OFF |
1 MΩ or more |
12 - 18
17 - 1 |
UP |
Less than 1 Ω |
12 - 17
18 - 1 |
DOWN |
Less than 1 Ω |
12 - 16
18 - 1 |
LEFT |
Less than 1 Ω |
12 - 18
16 - 1 |
RIGHT |
Less than 1 Ω |
- Changeover switch LH
| Terminal No. |
Inspection conditions |
Standard |
12 - 1
12 - 21 |
OFF |
1 MΩ or more |
12 - 20
21 - 1 |
DOWN |
Less than 1 Ω |
12 - 21
20 - 1 |
UP |
Less than 1 Ω |
12 - 19
21 - 1 |
LEFT |
Less than 1 Ω |
12 - 21
19 - 1 |
RIGHT |
Less than 1 Ω |
- Apply battery voltage between the switch door mirror terminals to check lighting condition of illumination inside the switch.
CAUTION:
When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
Incorrect polarity connection may cause LED damage inside the switch.
| Terminal No. |
Inspection conditions |
Standard |
| 24 (+) - 13 (-) |
Apply battery voltage. |
Light ON |
- Replace the switch power window main if it is found defective from the inspection result.