October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Switch Power Window Sub Front
- Measure the resistance between terminals of the switch power window sub front.
 Courtesy of SUBARU OF AMERICA, INC.
|
| Terminal No. |
Inspection conditions |
Standard |
| 6 - 5 |
OFF |
Less than 1 Ω |
2 - 1
2 - 5
2 - 6 |
1 MΩ or more |
| 2 - 6 |
Manual UP |
Less than 1 Ω |
5 - 6
2 - 5
1 - 2 |
1 MΩ or more |
2 - 6
1 - 2 |
Auto UP |
Less than 1 Ω |
5 - 6
2 - 5 |
1 MΩ or more |
| 2 - 5 |
Manual DOWN |
Less than 1 Ω |
5 - 6
2 - 6
1 - 2 |
1 MΩ or more |
2 - 5
1 - 2 |
Auto DOWN |
Less than 1 Ω |
5 - 6
2 - 6 |
1 MΩ or more |
- Apply battery voltage between the switch power window sub front terminals to check lighting condition of illumination inside the switch.
CAUTION:
When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
Incorrect polarity connection may cause LED damage inside the switch.
| Terminal No. |
Inspection conditions |
Standard |
| 7 (+) - 2 (-) |
Apply battery voltage. |
Light ON |
- Replace the switch power window sub front if it is found defective from the inspection result.