October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Power Rear Gate Inner Switch: Inspection
- Measure the resistance between connector terminals.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Power rear gate inner switch
| Terminal No. |
Inspection conditions |
Standard |
| 4 - 1 |
Switch OFF |
1 MΩ or more |
| Switch ON |
Less than 1 Ω |
- Power rear gate lock switch
| Terminal No. |
Inspection conditions |
Standard |
| 4 - 1 |
Switch OFF |
1 MΩ or more |
| Switch ON |
Less than 1 Ω |
- Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.
CAUTION:
When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
CAUTION:
Incorrect polarity connection may cause LED damage inside the switch.
| Terminal No. |
Inspection conditions |
Specification |
| 2 (+) - 3 (-) |
Apply battery voltage. |
Light On |
- Replace the power rear gate inner switch or the power rear gate lock switch, if the inspection result is not within the standard value.