LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> Rear Combination Light Assembly >> Installation >> Outback Model
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Outback Model

  1. Install the cord assembly as shown in the figure.
    G13951951Courtesy of SUBARU OF AMERICA, INC.
  2. Install the light assembly rear combination.
    CAUTION:
    • Be careful not to catch the harness in between the parts.
    • Make sure that gaskets are attached on the combination light assembly. If a gasket is not attached, water leakage may occur.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  3. Install the cover assembly rear combination light.
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals