October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Light Control Sensor: Removal
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
.
- Remove the auto light sensor.
NOTE:
When using a flat tip screwdriver, use an appropriate sized tool for the insertion opening, apply protective tape or cloth around the tool, and be careful not to cause damage.
- Attach the protective tape (a).
- Disconnect the claws and then pull out the auto light sensor.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Disconnect the connector and remove the auto light sensor.