LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Reverse Automatic Braking System >> Reverse Automatic Braking Control Module >> Installation >> Hybrid Model
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Hybrid Model

  1. Install the Reverse Automatic Braking Control Module.

    Tightening torque:  7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the box - sub-trunk.
    CAUTION: Be careful not to allow the lip portion of the weather strip - rear gate to be caught.
  3. Install the mat - rear floor.
  4. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals