LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Rear Finisher Assembly >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rear Finisher Assembly: Installation

  1. Install the finisher assembly rear.

    Tightening torque: 

    4.5 N.m (0.5 kgf.m, 3.3 ft.lb)

  2. Install the garnish assembly rear gate.

    Tightening torque: 

    4.5 N.m (0.5 kgf.m, 3.3 ft.lb)

  3. Install the motor assembly rear wiper, Ref. to WIPER AND WASHER SYSTEMS>Rear Wiper Motor>INSTALLATION .
  4. Install the sensor touch assembly. (Model with power rear gate)
  5. Install the cover rear gate. (Model without power rear gate)
  6. Install the trim panel assembly rear gate.
  7. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals