LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Power Rear Gate System >> Memory Height Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Memory Height Switch: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
  3. Remove the memory height switch.
    1. Release the claws and remove the memory height switch (c).
    G12401637Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals