LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Seat Heater System >> Removal >> Rear Seat Heater Control Module >> OUTBACK model
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

OUTBACK model

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work, Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the pad rear side RH. Refer to SEATS>Rear Seat>REMOVAL 
  3. Remove the trim panel assembly apron RH. Refer to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>REMOVAL>OUTBACK model .
  4. Remove the bolt, disconnect the connector and remove the rear seat heater Control Module.
    G13625668Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals