LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Rear Gate Opener Button >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rear Gate Opener Button: Installation

CAUTION: Make sure that the harness grommet of the garnish assembly is securely installed. If not properly installed, this may cause leaks.
  1. Install the switch opener rear gate.
  2. Install the garnish assembly rear gate LWR. Refer to EXTERIOR/INTERIOR TRIM>Rear Gate Garnish>ASSEMBLY .
  3. Install the garnish assembly rear gate, Refer to EXTERIOR/INTERIOR TRIM>Rear Gate Garnish>INSTALLATION .
  4. Install the trim panel assembly rear gate LWR. Refer to EXTERIOR/INTERIOR TRIM>Rear Gate Trim>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals