LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Push Button Ignition Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Push Button Ignition Switch: Removal

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>General Description>CAUTION .
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover LWR driver. Refer to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
  3. Remove the knee airbag module. Refer to AIRBAG SYSTEM>Knee Airbag Module>REMOVAL .
  4. Remove the push button start switch.
    1. Disconnect the connector.
    2. Release the claws, and remove the push button start switch.
      G13625786Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals