LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Front Hood Lock Assembly >> Inspection >> Unit Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Unit Inspection

  1. CHECK HOOD SWITCH 

    Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester

    G10270732Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Specification
    1 - 2 Open the front hood 1 Ω or more
    3 - 2 Close the front hood 1 Ω or more
  2. Replace the lock assembly front hood if faulty is found in the inspection.
scientia non olet · About LEMON Manuals